Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur télécharger pdf

15715-15717-15718-15725-InstructionSheet

INSTALLATION INSTRUCTIONS

OIL FILTER RELOCATION KIT

PART # 15715, 15717, 15718 & 15725

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

Please read these instructions completely before beginning installation

PRE-INSTALLATION

INSTALLATION

1. Remove the factory oil filter and clean the oil filter landing surface

on the engine block.

2. Take the four 1/2” NPT x 1/2” Hose Barbs supplied. Using a Teflon

Tape or suitable sealant, install two 1/2” NPT x 1/2” Hose Barbs

onto the Spin-On Adapter. Install the remaining two 1/2” NPT x

1/2” Hose Barbs onto the Ports-Up Filter Mount.

1. Apply a light coat of oil onto the O-ring.

2. Take the O-ring and install into the groove on the Spin-On

Adapter.

3. Install onto the engine. (See Diagram #2)

4. Hand Tighten with the same force used in tightening a factory oil

filter.

5. Choose a convenient location for the Ports-Up Filter Mount. Make

sure there is enough space for future servicing of the oil filter.

Suggested Locations: Firewall, Radiator Support, Fender well

6. Take the 3/4-16 Filter Nipple supplied, making sure the shorter

end of threads is installed onto the Ports-Up Filter Mount.

7. Using the filter mount as a template, mark and drill three 3/16”

holes.

8. Using the #14 Sheet Metal Screws provided, install the Ports-Up

Filter Mount onto the vehicle.

9. Using the Hose Clamps provided, attach both ends of the 1/2”

Hose provided to the hose barbs on the installed Spin-On Adapter

forming a loop.

10. Carefully route hose over to the Ports-Up Filter Mount.

Keep hoses away from sharp edges, moving parts and

Spin-On Adapter

Filter Mount

Note:

3. Take the Hex Sleeve Nut and slide it into the Spin-on Adapters

hex feature. Sleeve Nut will only install correctly in one direction.

(See Diagram #1)

4. Take the supplied Snap Ring and carefully install into the snap ring

groove of the casting making sure it is securely fastened.

(See Diagram #1)

(See Diagram #3 on page 2)

TOOLS NEEDED

7/8” Open End Wrench

Standard Screw Driver

Drill

3/16” Drill Bit

Teflon Tape

KIT CONTENTS

QTY. DESCRIPTION

1 Spin-On Adapter

1 Ports Up Filter Mount

1 O-ring (Spin-On Adapter)

1 3/4-16 Filter Nipple

1 Hex Sleeve Nut

QTY. DESCRIPTION

1 Snap Ring

10ft. 1/2” Hose

4 1/2” NPT x 1/2” Hose Barb

4 Hose Clamps

3 #14 Sheet Metal Screws

Snap

Ring

Hex Sleeve

Nut

Snap Ring

Groove

Hose

Clamp

1/2” Hose

1/2” NPT x 1/2”

Hose Barb

Spin-On

Adapter

Spin-On

Adapter

O-ring

Diagram #2

PART #

THREAD SIZE

15715

15717

15718

15725

3/4”-16

18mm x 1.5

mm x 1.5

(Continues on Page 2)

Diagram #1

IMPORTANT

The new Filter Mount is designed to accept a 3/4-16 oil filter

(Typical Ford filter) Use Derale Part # 13092 or reference chart

on reverse for manufacturers part numbers.

1 2

Résumé du contenu

Page 1 - OIL FILTER RELOCATION KIT

15715-15717-15718-15725-InstructionSheetINSTALLATION INSTRUCTIONSOIL FILTER RELOCATION KITPART # 15715, 15717, 15718 & 15725Derale Performance, Lo

Page 2 - Diagram #3

15715-15717-15718-15725-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comexhaust. Do not bend hose sharper than a 5”

Plus de documents pour Capteurs Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po

Voir le document Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur

Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur (2 pages)

Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur (1 pages)

Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur (2 pages)

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po. Derale Performance Engine Oil Filter Relocation Kit, 1_2" NPT Ports with 3__4-16 Engine Thread Size" User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Capteurs Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Derale-performance Engine Oil Filter Relocation Kit, 1_2" NPT Po