Derale-performance Standard Engine Spin On Adapter with 1_2" NPT Manuel d'utilisateur télécharger pdf

15705-InstructionSheet

INSTALLATION INSTRUCTIONS

ENGINE SPIN-ON ADAPTER KIT

PART # 15705

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

Please read these instructions completely before beginning installation

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on

vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the

parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting

the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.

Failure to follow instructions can lead to severe damage and personal injury.

TOOLS NEEDED

Open End Wrenches

Oil Filter Wrench

KIT CONTENTS

QTY. DESCRIPTION

1 Spin-On Adapter

1 Adapter Plate

PART # THREAD SIZE

15705

13/16”-16

The purpose of a Spin-on Adapter is to provide external

oil lines for remote filter mounts and oil coolers.

QTY. DESCRIPTION

1 O-ring (Spin-On Adapter)

1 O-ring (Adapter Plate)

Warning:

Important:

When routing hoses, be sure to keep all hoses away from

sharp edges, moving parts and hot engine components.

Hoses should be routed carefully and should not be bent in less than a 5” radius.

A kinked hose will restrict flow and could cause engine failure.

1. Start the engine and quickly check all connections for leaks.

2. Turn-off the engine and check the oil.

3. Add oil as needed.

VEHICLE TESTING

PRE-INSTALLATION

INSTALLATION

Note: This kit includes a 3 1/2” O-ring Adapter Plate, this Adapter Plate is

used Primarily on GM vehicles Manufactured between 1963-2007.

If your vehicle does not require the Adapter Plate, please disregard.

1. Remove the factory oil filter and clean the oil filter landing surface

on the engine block.

2. To determine if you need the supplied Adapter Plate, hold it up to

the oil filter landing on the block. If the O-ring seats correctly on

the landing you will use both the Adapter Plate and Spin-on

Adapter. If it is too large, then disregard the Adapter Plate and

O-ring and only use the Spin-on Adapter.

1. Apply a light coat of oil onto the O-ring(s).

2. Take the O-ring and install into the groove on the Spin-On

Adapter and Adapter Plate (if used).

3. Install onto the engine. (See Diagram #1)

4. Hand Tighten with the same force used in tightening a factory oil

filter.

Optional

Adapter Plate

& O-ring

Spin-On

Adapter

Spin-On

Adapter

O-ring

Diagram #1

Hose Barb

(Not Included)

1/2” Hose

1/2” NPT Ports

Résumé du contenu

Page 1 - PART # 15705

15705-InstructionSheetINSTALLATION INSTRUCTIONSENGINE SPIN-ON ADAPTER KITPART # 15705Derale Performance, Los Angeles, CA 800.421.6288 www.derale.comPl

Plus de documents pour Capteurs Derale-performance Standard Engine Spin On Adapter with 1_2" NPT

Voir le document Derale-performance Standard Engine Spin On Adapter with 1_2" NPT Manuel d'utilisateur

Derale-performance Standard Engine Spin On Adapter with 1_2" NPT Manuel d'utilisateur (1 pages)

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Standard Engine Spin On Adapter with 1_2" NPT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Derale-performance Standard Engine Spin On Adapter with 1_2" NPT. Derale Performance Standard Engine Spin On Adapter with 1_2" NPT Ports, 13__16-16 Engine Thread" User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Capteurs Derale-performance Standard Engine Spin On Adapter with 1_2" NPT

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Derale-performance Standard Engine Spin On Adapter with 1_2" NPT