Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3 Manuel d'utilisateur télécharger pdf

15782-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

ENGINE SANDWICH ADAPATER KIT

PART # 15782

KIT CONTENTS

QTY. DESCRIPTION

1 Sandwich Adapter

1 2 3/4” O-ring

1 Adapter Plate

1 3 1/2” O-ring

2 3/8” NPT x 1/2” Barb Fittings

QTY. DESCRIPTION

1 3/4-16 Sleeve Nut (Yellow)

1 18mm Sleeve Nut (White)

1 20mm Sleeve Nut (Black)

1 22mm Sleeve Nut (Green)

1 13/16-16 Sleeve Nut (Blue)

1 13/16-16 Sleeve Nut (Red)

TOOLS NEEDED

Standard Screw Driver or

5/16” Nut Driver

Dyke Pliers

Torque Wrench

11/16” Open End Wrench

1 1/8” Socket

Teflon Tape

Please read these instructions completely before starting the installation.

IMPORTANT

In most cases the Factory Oil Filter will work with the supplied sandwich

adapter. In some applications where the frame or exhaust system interferes

with the new filter depth we recommend using a shorter filter length.

See chart below for possible filter options.

FRAM WIX FRAM WIX

THREAD LABEL FILTER FRAM FILTER WIX FILTER FRAM FILTER WIX

SIZE COLOR HEIGHT P/N HEIGHT P/N HEIGHT P/N HEIGHT P/N

3/4-16 YELLOW

13/16-16 BLUE/RED

18mm x 1.5 WHITE

20mm x 1.5 BLACK

22mm x 1.5 GREEN

4.92 PH3600 4.83 51516 3.34 PH3614 3.4 51348

4.94 PH3429 4.83 51045 3.36 Ph3506 3.4 51042

4.94 PH3980 4.83 51036 3.36 PH3387A 3.4 51040

3.47 PH7317 N/A N/A 3.39 PH3593A 3.14 51381

4.94 PH3750 4.57 57026 3.98 PH2 3.43 57060

IMPORTANT

This kit is designed to fit all vehicles with engine block

oil filter landings ranging from 2 3/4” to 3 1/2”, which

represents 75% of all vehicles. For vehicles with 2 1/2”

oil filter landings, please visit www.derale.com for

alternative Sandwich Adapter Kits.

Diagram #2

Option 1

‘O’Ring

Sandwich

Adapter

Sleeve

Nut

Brass

Fittings

Oil

Lines

Hose

Clamps

To Oil

Cooler

From Oil

Cooler

SELECTING COMPONENTS

The components supplied in this kit are for multiple applications. Some

components will not be used for your specific application. To easily select

the correct components for your application, follow the steps below. Then

proceed to the SANDWICH ADAPTER INSTALLATION section.

1. Remove the factory oil filter from the vehicle.

2. Using a rag, clean the oil filter landing on the engine.

3. Take the supplied Sandwich Adapter and Adapter Plate.

4. To determine if your application uses the supplied Adapter Plate, first

hold the Adapter Plate up to the oil filter landing on the engine block.

The casting needs to seat directly onto the landing without obstruction.

If the Adapter Plate is too large, then disregard the Adapter Plate and

O-ring. (See Diagram #3)

5. Take the supplied Sandwich Adapter and hold it up the oil filter landing

on the engine block. The casting needs to seat directly onto the landing

without obstruction. (See Diagram #2)

(See Diagram #1)

1. The Red Sleeve Nut is ONLY used when the Adapter Plate is being

used. If you have previously determined that your application will use the

Adapter Plate then disregard the 5 remaining Sleeve Nuts. If you are not

using the Adapter Plate, please disregard the Red Sleeve Nut.

2. Using the remaining 5 supplied Sleeve Nuts, try and screw each Sleeve

Nut onto the filter nipple on the engine block until the correct size will

completely thread onto the nipple. Once you have located the correct

Sleeve Nut, disregard the remaining 4 Sleeve Nuts.

Selecting the Sandwich Adapter and/or Adapter Plate

Selecting the Sleeve Nut

The Adapter Plate & O-ring are designed to fit vehicles with a

3 1/2” filter landing. Primarily 1963-2007 GM SB & BB V-8 engines.

There are 6 supplied Sleeve Nuts in this kit. Only 1 Sleeve Nut will

be used for your application.

For reference purposes Sleeve Nuts are color coded.Note:

SLEEVE NUT

Colored Label

Diagram #1

(Continues on Page 2)

Option 2

‘O’Ring

Adapter Plate

(Certain GM Models)

Diagram #3

Sandwich

Adapter

Sleeve

Nut

(Red)

Brass

Fittings

Hose

Clamps

Oil

Lines

To Oil

Cooler

From Oil

Cooler

1 2

Résumé du contenu

Page 1 - PART # 15782

15782-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSENGINE SANDWICH ADAPATER KITPART # 15782

Page 2 - SANDWICH ADAPTER INSTALLATION

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working onvehicles. Always use

Plus de documents pour Capteurs Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3

Voir le document Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3 Manuel d'utilisateur

Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3 Manuel d'utilisateur (1 pages)

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3. Derale Performance Universal Thermostatic Sandwich Adapter Kit with 3__8" NPT Ports User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Capteurs Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Derale-performance Universal Thermostatic Sandwich Adapter Kit with 3