Derale-performance Single Side Ports 1_2" NPT Filter Mount with Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

REMOTE FILTER MOUNT MOUNT

PART # 25709 & 25729

Please read these instructions completely before beginning installation

FILTER MOUNT INSTALLATION

VEHICLE TESTING

1. Choose a convenient location for the Side Ports Filter Mount.

Make sure there is enough space for future servicing of the

oil filter. Suggested Locations: Firewall, Radiator Support,

Fender well.

2. Take the Filter Nipple supplied, making sure the shorter end

of threads is installed onto the Side Ports Filter Mount.

(See Diagram #1)

3. Using the filter mount as a template, mark and drill three

3/16” holes.

3. Using #14 Sheet Metal Screws (Not Included), install the

Side Ports Filter Mount onto the vehicle.

4. Using Teflon Tape or a suitable sealant install one Hose

Barb Fitting (Not Included) to a “IN” port and one to a “OUT”

port. (Ports are marked by the arrows.) Next install the 1/2”

NPT Plugs into the two remaining ports.

Do not over torque Fittings.

5. Carefully route hose over to the Side Ports Filter Mount. Be

sure to connect In/Out Hose to the correct Port. Use Filter

mount arrows for flow direction.

Keep hoses away from sharp edges, moving parts

and exhaust. Do not bend hose sharper than a 5” radius.

6. Apply a light coat of oil onto the o-ring of your new Oil Filter

(Not Included) and install on the filter mount.

Warning:

Note:

1. Start the engine and quickly check all connections for leaks.

2. Turn-off the engine and check the oil.

3. Add oil as needed.

TOOLS NEEDED

7/8” Open End Wrench

Standard Screw Driver

1/8” Allen Wrench

Drill

3/16” Drill Bit

Teflon Tape

KIT CONTENTS

QTY. DESCRIPTION

1 Side Ports Filter Mount

1 Filter Nipple

2 1/2” NPT Plugs

Diagram #1

IMPORTANT

This Filter Mount is machined with

1/2” NPT Ports and requires Teflon

Tape or a suitable sealant. Be sure

not to over tighten Fittings.

25709-25729-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on

vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the

parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting

the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.

Failure to follow instructions can lead to severe damage and personal injury.

Oil Filter

(Not Included)

Filter

Nipple

Side Ports

Filter Mount

Revised-7/3/2012

Fittings

(Not Included)

Plugs

Résumé du contenu

Page 1 - PART # 25709 & 25729

INSTALLATION INSTRUCTIONSREMOTE FILTER MOUNT MOUNTPART # 25709 & 25729Please read these instructions completely before beginning installationFILTE

Plus de documents pour Capteurs Derale-performance Single Side Ports 1_2" NPT Filter Mount with

Voir le document Derale-performance Single Side Ports 1_2" NPT Filter Mount with Manuel d'utilisateur

Derale-performance Single Side Ports 1_2" NPT Filter Mount with Manuel d'utilisateur (1 pages)

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Single Side Ports 1_2" NPT Filter Mount with Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Derale-performance Single Side Ports 1_2" NPT Filter Mount with . Derale Performance Single Side Ports 1_2" NPT Filter Mount with 13__16-16 Filter Threads" User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Capteurs Derale-performance Single Side Ports 1_2" NPT Filter Mount with

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Derale-performance Single Side Ports 1_2" NPT Filter Mount with