Derale-performance 60 Amp Relay Manuel d'utilisateur télécharger pdf

Installation Instructions

P.N. 16764

Electric Fan Relay & Harness

All electric fans that draw over 8 Amps need a

relay to protect the fan and the vehicle. The

relay acts as a switch between the battery and

fan so high amperage draw fans do not disrupt

the electrical system of the vehicle.

Note: Before starting installation, read

instructions completely and disconnect

battery.

Relay & Harness Mounting

The relay must be mounted in a cool, dry

location, away from hot components. Soldering

wire connections is preferred but good quality

solderless connectors can also be used.

Wiring

Red: Attach to positive (+) side of battery.

Yellow: Attach to fan positive (+) lead.

White: Attach to an ignition switched 12-volt

source. If this wire is hooked up to a constant

source (like the battery) the fan will continue to

run after the vehicle is shut off and could run

down the battery.

Black: Attach to a good chassis ground. Do the

same with the ground lead off the fan motor.

Brown: Disregard this wire, it is not used for

electric fans.

Air Conditioning Override

If you desire to turn on electric fan when the

Air conditioning is on, run a wire from

positive (+) connection on A/C clutch. Splice

other end to White wire on relay harness.

The relay will activate the fan whenever the

A/C is turned on

DERALE COOLING PRODUCTS

800-421-6288

www.derale.com

Installation Instructions P.N. 16764 Electric Fan Relay & Harness All electric fans that draw over 8 Amps need a relay to protect the fan and the

Pas de commentaire

Derale-performance 60 Amp Relay Manuel d'utilisateur