Derale-performance Single Mount 1_2" NPT Ports Up Fuel Filter_Wa Manuel d'utilisateur télécharger pdf

13072-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

FUEL FILTER - WATER SEPARATOR KIT

PART # 13072

Please read these instructions completely before starting the installation.

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on

vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the

parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting

the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.

Failure to follow instructions can lead to severe damage and personal injury.

KIT CONTENTS

QTY. DESCRIPTION

1 Filter Mount

1 Oil Filter

TOOLS NEEDED

QTY. DESCRIPTION

1 3/4-16 Filter Nipple

INSTALLATION

1. Choose a convenient location for the filter mount and

filter, making sure you allow enough space for servicing

the petcock and for replacing the filter element.

Suggested locations are the fender well, firewall or

the radiator bulkhead.

2. Mark and drill three holes and mount the filter bracket using the hardware provided.

3. Install the fuel inlet and outlet lines into the appropriate ports. Do not over tighten.

4. Apply a light coat of clean oil to the gasket on the fuel filter-water separator and hand-

tighten it on to the filter mount. Once the filter is snug to the filter mount, tighten the

filter 1/4” turn; therefore assuring that the filter will not leak. Filter element should be

replaced every 25,000 miles. Order Derale replacement filter element part #13075.

The water should be drained every 3,000 miles. Both intervals should be shortened if

the fuel being filtered is suspected of containing high levels of contaminants and/or

water.

5. Start engine and check all connections for leaks. Re-tighten if necessary. The Fuel

Filter-Water Separator is designed for use with most fuels: gasoline, diesel fuel,

gasohol, etc. and most additives.

Drill

3/16” Drill Bit

Teflon Tape

Marker

FILTER SPECIFICATIONS

12 Micron

1”-14 Thread Size

Filter Seal

ID: 2.45” OD: 2.80”

22 Gram Capacity

100 psi Element

Burst Pressure

300 psi Hydrostatic

Burst Pressure

Rev-081111

Résumé du contenu

Page 1 - PART # 13072

13072-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSFUEL FILTER - WATER SEPARATOR KITPART

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Single Mount 1_2" NPT Ports Up Fuel Filter_Wa Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour l'eau Derale-performance Single Mount 1_2" NPT Ports Up Fuel Filter_Wa. Derale Performance Single Mount 1_2" NPT Ports Up Fuel Filter_Water Separator Kit User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels