Derale-performance Fluid Control Thermostat w__Bracket Manuel d'utilisateur télécharger pdf

35782-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

FLUID CONTROL THERMOSTAT W/ BRACKET

PART # 35782

KIT CONTENTS

QTY. DESCRIPTION

1 Fluid Control Thermostat - 7/8”-14 / -10 AN Ports

1 Mounting Bracket

4 1/4-20 x 3/8” Stainless Bolts

4 #14 Sheet Metal Screws

Please read these instructions completely before starting the installation.

The Fluid Control Thermostat can be mounted in any position.

Reference Diagram#1&2toinsurethedirectionofoilflowiscorrect.

Standard Screw Driver

Teflon Tape

Open End Wrench’s

Allen Wrench

Marker

Drill

3/16” Drill Bit

TOOLS NEEDED

Transmissions Engines

RECOMMENDED FOR

How It Works:

When the oil is cool the valve is in the open position, allowing oil to be applied

equally to both the inlet and outlet of the cooler, preventing oil flow through the

cooler. As the oil temperature approaches 180ºF the valve begins to close, forcing

all of the oil to flow through the cooler and return through the valve to the source.

This fail-safe design insures full oil flow to the source regardless of whether the

valve is open or closed. The cooler remains full of oil at all times, eliminating

pressure variations, aeration and foaming of the oil.

IMPORTANT

Diagram #2Diagram #2

made in

USA

Engine/

Transmission

Fluid Control

Thermostat

Oil Cooler

(Not Included)

Diagram #1Diagram #1

AFTER COOLER

BEFORE COOLER

TYPICAL INSTALLATION

AFTER COOLER

BEFORE COOLER

made in

USA

made in

USA

Option 2

1/4-20 x 3/8” Stainless Bolts

Mounting

Bracket

Thermostat

(Not Included)

MOUNTING LOCATION

BRACKET INSTALLATION

Choose a convenient location on the vehicles frame, firewall, core support or sub frame.

1. Using the four 1/4-20 x 3/8” Stainless Bolts, attach the Mounting Bracket to the fluid control thermostat in the desired

orientation. (See Diagram #1)

Loctite or suitable sealant can be used for a more permanent installation.

2. Using the Mounting Bracket Assembly as a template, mark and drill four 3/16” holes in the desired location.

3. Using the four #14 Sheet Metal Screws, attach the Mounting Bracket Assembly.

NOTE:

Option 1

Mounting

Bracket

Diagram #1

1/4-20 x 3/8” Stainless Bolts

Thermostat

(Not Included)

The Fluid Control Thermostat is tapped

for -10 AN O-ring / 7/8”-14 Fittings.

O-ring is required to proper installation.

Do not use pipe threaded fittings.

WARNING

Résumé du contenu

Page 1 - PART # 35782

35782-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSFLUID CONTROL THERMOSTAT W/ BRACKETPART

Commentaires sur ces manuels

Pas de commentaire

Derale-performance Fluid Control Thermostat w__Bracket Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Chaudière à eau Derale-performance Fluid Control Thermostat w__Bracket. Derale Performance Fluid Control Thermostat w__Bracket User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Chaudière à eau Derale-performance Fluid Control Thermostat w__Bracket

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Chaudière à eau Derale-performance Fluid Control Thermostat wBracket. Derale Performance Fluid Control Thermostat wBracket User Manual Manuel d'utilisatio