Derale-performance 15 Row Atomic Cool Plate & Fin Remote Engine O Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Chaudière à eau Derale-performance 15 Row Atomic Cool Plate & Fin Remote Engine O. Derale Performance 15 Row Atomic Cool Plate & Fin Remote Engine Oil Cooler Kit, -8AN User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
15450-15500-15660-InstructionSheet
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
INSTALLATION INSTRUCTIONS
REMOTE COOLER INSTALL KIT
PART # 15450, 15500 & 15660
KIT CONTENTS
QTY. DESCRIPTION
1 Oil Cooler Assembly
1 Sandwich Adapter
1 2 3/4” O-ring
1 Adapter Plate
1 3 ½” O-ring
2 3/8” NPT x 1/2” Barb Fittings
1 -8AN Male x 1/2” Barb Fitting
3 -8AN Female x 1/2” Barb Fitting
10ft 1/2” OEM Spec Hose
1 In-line Thermostat Fitting
1 Thermostat Switch
4 Hose Clamps
8 1/4” Washers
QTY. DESCRIPTION
1 3/4-16 Sleeve Nut (Yellow)
1 18mm Sleeve Nut (White)
1 20mm Sleeve Nut (Black)
1 22mm Sleeve Nut (Green)
1 13/16-16 Sleeve Nut (Blue)
1 13/16-16 Sleeve Nut (Red)
4 1/4-20 x 1” Hex Bolts
4 1/4-20 Lock Nuts
4 6” Zip Ties
1 #10 Blue Ring Terminal
2 Blue Female Connector
1 Blue Wire Tap Connector
In most cases the Factory Oil Filter will work with the
supplied sandwich adapter. In some applications where
the frame or exhaust system interferes with the new
filter depth we recommend using a shorter filter length.
See chart below for possible filter options.
FRAM WIX FRAM WIX
THREAD LABEL FILTER FRAM FILTER WIX FILTER FRAM FILTER WIX
SIZE COLOR HEIGHT P/N HEIGHT P/N HEIGHT P/N HEIGHT P/N
3/4-16 YELLOW
13/16-16 BLUE/RED
18mm x 1.5 WHITE
20mm x 1.5 BLACK
22mm x 1.5 GREEN
4.92 PH3600 4.83 51516 3.34 PH3614 3.4 51348
4.94 PH3429 4.83 51045 3.36 Ph3506 3.4 51042
4.94 PH3980 4.83 51036 3.36 PH3387A 3.4 51040
3.47 PH7317 N/A N/A 3.39 PH3593A 3.14 51381
4.94 PH3750 4.57 57026 3.98 PH2 3.43 57060
SLEEVE NUT
Colored Label
Diagram #1
COOLER LOCATION
COOLER MOUNTING
Cooler can be mounted anywhere space permits. When selecting the best
location for your vehicle, look for a location that will deliver the maximum airflow.
1. Holding the cooler in place use a marker to identify the four mounting
hole locations.
2. Using a drill and 9/32” drill bit, drill the four mounting holes in the
desired location.
3. Using the 1/4-20 Bolts, Washers & Lock Nuts Included, install cooler.
PRE-INSTALLATION
Important: The Adapter Plate & O-ring are designed to fit vehicles with
a 3 1/2” filter landing. Primarily 1963-2007 GM SB & BB V-8 engines.
There are 6 supplied Sleeve Nuts in this kit. Only 1 Sleeve Nut will be
used for your application.
SELECTING COMPONENTS
Selecting the Sandwich Adapter and/or Adapter Plate
Selecting the Sleeve Nut
To easily select the correct components for your application, follow the steps
below. Then proceed to the SANDWICH ADAPTER INSTALLATION section.
1. Remove the factory oil filter from the vehicle.
2. Using a rag, clean the oil filter landing on the engine.
3. Take the supplied Sandwich Adapter and Adapter Plate.
4. To determine if your application uses the supplied Adapter Plate, first hold
the Adapter Plate up to the oil filter landing on the engine block. The
casting needs to seat directly onto the landing without obstruction. If the
Adapter Plate is too large, then disregard the Adapter Plate and O-ring.
(See Diagram #3)
5. Take the supplied Sandwich Adapter and hold it up the oil filter landing on
the engine block. The casting needs to seat directly onto the landing
without obstruction. (See Diagram #2)
1. The Red Sleeve Nut is ONLY used when the Adapter Plate is being
used. If you have previously determined that your application will use the
Adapter Plate then disregard the 5 remaining Sleeve Nuts. If you are not
using the Adapter Plate, please disregard the Red Sleeve Nut.
2. Using the remaining 5 supplied Sleeve Nuts, try and screw each Sleeve
Nut onto the filter nipple on the engine block until the correct size will
completely thread onto the nipple. Once you have located the correct
Sleeve Nut, disregard the remaining 4 Sleeve Nuts.
(Page 1)
Diagram #2
Adapter Plate
(Red)
Diagram #3
Option 1
Option 2
Please read these instructions completely before starting the installation.
This kit is designed to fit all vehicles with engine block
oil filter landings ranging from 2 3/4” to 3 1/2”, which
represents 75% of all vehicles. For vehicles with 2 1/2”
oil filter landings, please visit www.derale.com for
alternative Sandwich Adapter Kits.
IMPORTANT
Vue de la page 0
1 2

Résumé du contenu

Page 1 - REMOTE COOLER INSTALL KIT

15450-15500-15660-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSREMOTE COOLER INSTALL KIT

Page 2 - Diagram #6Diagram #6

Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working onvehicles. Always use

Commentaires sur ces manuels

Pas de commentaire