Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O Manuel d'utilisateur télécharger pdf

15651-InstructionSheet

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com

INSTALLATION INSTRUCTIONS

ENGINE OIL COOLER KIT

PART # 15651

KIT CONTENTS

QTY. DESCRIPTION

1 Oil Cooler

2 -8AN Aluminum Fittings

1 Spin-On Adapter

1 Adapter Plate

1 Ports Up Filter Mount

1 O-ring (Spin-On Adapter)

1 O-ring (Adapter Plate)

1 Snap Ring

1 3/4-16 Filter Nipple

2 -8AN Female x 1/2” Barb Fittings

4 1/2” NPT x 1/2” Hose Barb

QTY. DESCRIPTION

3 #14 Sheet Metal Screws

1 3/4-16 Hex Sleeve Nut

1 13/16-16 Hex Sleeve Nut

1 18mm x 1.5 Hex Sleeve Nut

1 20mm x 1.5 Hex Sleeve Nut

1 22mm x 1.5 Hex Sleeve Nut

10ft 1/2” OEM Spec Hose

5 6” Zip Ties

6 Hose Clamps

4 Mounting Rods

4 Foam Pads

4 Mounting Clips

(Page 1)

The Oil Cooler can be mounted in multiple locations on your vehicle. Reference Diagram # 1

for possible cooler positions. #1 is the ideal location, #2 is second best and #4 being the last

choice.

The Cooler core will flow in either direction, there is no specified inlet or outlet port.Note:

Diagram #1

TOOLS NEEDED

Standard Screw Driver or

5/16” Nut Driver

Dyke Pliers

Drill and 3/16” Bit

COOLER MOUNTING

(See Diagram #2)

1. Identify the 4 Mounting Rods, 4 Mounting Clips and

4 1x1 Foam Pads.

2. One by one, Install the 4 Mounting Rods thru the Oil Cooler.

3. Take the 1x1 Foam Pads supplied, peel off the paper lining & slide

them onto the Mounting Rods, sticking them against the Oil Cooler.

4. Take the Cooler Assembly with attached looped hose and hold in

the desired location.

5. Install the 4 Mounting Rods thru the Radiator/Condenser core.

Do not use excessive force when pushing the Mounting Rods

through the Radiator/Condenser. Excessive force could cause

damage to the fins and possibly puncture a tube.

6. Take the Mounting Clips supplied, making sure they are in the

correct direction (Derale writing out) install onto the Mounting Rods

and cinch them until the 1x1 Foam Pads are slightly compressed.

7. Cut off any excess Mounting Rods.

Warning:

7/8” Open End Wrench

11/16” Open End Wrench

1 1/8” Socket

Teflon Tape

Please read these instructions completely before starting the installation.

COOLER LOCATION

When selecting the best location for your vehicle, always consider a location that will

deliver the maximum airflow.

PRE-INSTALLATION

ecure in place using the Hose Clamps. (See Diagram #2)

1. Take the two -8AN Aluminum Fittings supplied and install them onto the Oil Cooler.

O-ring fittings do not require any thread sealant.

2. Identify the two -8AN Female x 1/2” Barb Fittings.

3. Install the two -8AN Female x 1/2” Barb Fittings onto the previously installed aluminum fittings

on the Oil Cooler.

4. Identify the 1/2” x 10ft. OEM Spec Hose and Hose Clamps.

5. Slide one hose clamp on each end of the supplied Hose.

6. Using a dab of oil lubricate each end of the hose and install hose onto the 1/2” barb fiittings

now installed on the cooler forming a loop.

7. S

Note:

Diagram #2

IMPORTANT

This kit is designed to fit vehicles with engine block oil

filter landings ranging from 2 1/2” to 3 1/2”, which

represents 90% of all vehicles.

Foam Pads

Mounting

Clips

Mounting

Rods

12/16/2010

1 2 3

Résumé du contenu

Page 1 - PART # 15651

15651-InstructionSheetDerale Performance, Los Angeles, CA 800.421.6288 www.derale.comINSTALLATION INSTRUCTIONSENGINE OIL COOLER KITPART # 15651KIT

Page 2 - Diagram #5

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.comSELECTING COMPONENTSTo easily select the correct components for your application, f

Page 3 - Diagram #6

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.comVEHICLE TESTING1. Start the engine and quickly check all connections for leaks.2. Tu

Plus de documents pour Chaudière à eau Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O

Voir le document Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O Manuel d'utilisateur

Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O Manuel d'utilisateur (2 pages)

Commentaires sur ces manuels

Pas de commentaire

Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Chaudière à eau Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O. Derale Performance 10 Row Series 10000 Stack Plate Universal Engine Oil Cooler Kit, Spin On Adapter User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Chaudière à eau Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O

Commentaires sur ces manuels

Produits connexes et manuels pour Chaudière à eau Derale-performance 10 Row Series 10000 Stack Plate Universal Engine O